-
01
Process: material discharge from the warehouse, a robot gripping the material, an assembly (left and right base plate), a locking decoupling nut, marking the material to be transported under the material, a manual over the checker.
-
02
The equipment should realize the torque detection storage during the locking process, so that the product quality can be easily traced.
-
03
Production line grippers that can pick and place materials at the same station
-
04
The overall operation of the production line can be controlled and information can be displayed on the screen of the main control cabinet.
-
05
Failure rate of feed mechanism output and nut positioning less than 2000/1 frequency
-
06
The total assembly time of the production line is 40 s2s, excluding the manual preparation time.
-
07
Power supply: 380Vs10%, 50HZ; three-phase five-wire system
-
08
Ambient conditions: Temperature 0-40°C; Humidity <90%
-
09
Dry gas source: Pressure 0.5-0.7MPa
